Compression Fittings Technical Information
Robert-James Sales, Inc.
 
 
Compression Fittings
Loading
   Compression Fittings Menu    Technical Information
Technical Information
Sec. A
• How to order

Sec. B
• Instrument Tee
• Heat Exchanger Tee
• Thermocouple Bore Through
• TylubeTM Thread Lubricant

Sec. C
• CBC-Lok® Installation Instructions
• To Remove Tube and Re-Connect Tube Fitting

Sec. D
• CBC-Lok® Tubing Selection & Preparation

Sec. E
• Gas Service
• Precautions for Weld Ends
• Typsy Leak Detector
• Gap Gages
• Safety Guidelines
• Quality Control

Sec. F
• Pipe Thread Specifications
• Temperature Ratings
• Tube Pressure Derating Factors at Elevated Temperatures

Sec. G
• Heat Traceability
• Raw Material Specifications
• Tylok Pre-Setting Tool

Sec. H
• Tube Insertion Chart
• Tubing–General Applications

Sec. I  
• Notice
• Limited Warranty

How to Order

CBC-Lok® Tube Fittings are ordered as listed in this catalog by inserting the material code before the part number.
CBC-Lok® Tube Fittings can be identified through the part number as to material, tube size, configuration and thread
connection. The part number describes a complete fitting assembly. The size nomenclature to describe a tee fitting
is from left (1) to right (2) and down (3). Special Configurations available upon request.

Example: A Stainless Steel Female Run Tee, 3/8” Tube Size to 1/4” Female Pipe to 3/8” Tube is designated as
follows.



Corrosion Resistant Piping Products
Office & Warehouse Centers to Serve You:

RJ 40 Years 1972-2012

  FILLING OVER TWO THIRDS OF ALL ORDERS DIRECTLY FROM OUR WAREHOUSE STOCKS.
COPYRIGHT Robert-James Sales, Inc.