Plate Flanges - Class 150
Plate Flanges

Class 150 | 300 | B & D


Class 150 Plate Flanges

150 lb. Slip-On Plate Flanges


• OD AND DRILLING for 1/2" through 24" pipe size's per ASME/ANSI B16.5-1996 Class 150
• OD AND DRILLING for 30" & 36" pipe size per ASME/ANSI B16.1-1989 Class 125


150 lb. Slip on Plate Flange sizes chart

Notes:
This table is intended for estimating purposes only. Applications vary, confirm all dimensions with your engineering department prior to ordering. Refer to ASME B16.5-1996 and B16.1-1989 standard for complete engineering and applications information. All dimensions are in inches unless otherwise noted. Inside diameter and thickness dimensions are application specific. Recommended bolts are 1/8” smaller in diameter than the bolt hole diameters shown.

Robert-James Sales, Inc.
The contents of this website are presented for information purposes only, and while effort has been made to ensure their accuracy, they are not to be contrived as warranties or guarantees, expressed or implied, regarding the products or services described herein or their use or applicability. All sales are governed by our terms and conditions, which are available on request. We reserve the right to modify or improve the designs or specifications of our products at any time without notice. Always verify that you have the most recent product specifications or other documentation prior to the installation of these products.